New patented clamp design with ball-less head for stable shooting without deviation.Flexible design suitable for adhering to slightly curved surfaces, unlocking shooting angles previously thought impossible.Flexible Adhesive Base:Clean the surface to be adhered with a cleaning wipe before use. Ensure the surface is clean, dry, and smooth.If the adhesive base falls off from the surface, it cannot be reused.To ensure secure fixation, press the product firmly against the surface for 30 seconds after adhering it to ensure the flexible base completely conforms to the surface.For initial use, let the adhesive base sit for at least 24 hours before installing the Insta360 camera.If the three-claw adapter is worn out over time, use the anti-slip ring to improve safety and stability.The flexible adhesive base cannot be used with any selfie sticks or extension rods.
Notes:The metal clamp is compatible with objects with diameters ranging from 17 mm to 37 mm.If the metal clamp grips a smooth metal tube, it is recommended to tighten it with the included wrench.When installing a selfie stick on the heavy-duty clamp, we recommend using the Insta360 High-Strength Invisible Selfie Stick, extending it to ≤100 cm; the flexible adhesive base cannot be used with any selfie sticks or extension rods.The selfie stick can only be connected and installed through the 1/4" interface on the heavy-duty clamp; it cannot be connected to other accessories and then installed with the selfie stick.If the camera is directly mounted on the heavy-duty clamp, the riding speed should not exceed 80 km/h on the road, and the off-road riding test speed should not exceed 40 km/h. The heavy-duty clamp attached to the selfie stick only supports riding on flat roads and requires tightening with a wrench.The flexible adhesive base and heavy-duty clamp must be installed according to the instructions; do not install them in a non-compliant manner to avoid accessory dropping and damage.Before installation, users should assess whether the structure of the object to be installed or the adhesive surface is strong enough.
Technical Specifications:
Heavy-duty Clamp Bracket:
- Weight: 272 grams
- Dimensions: 124 x 73 x 53 mm
Flexible Adhesive Base:
- Weight: 40 grams
- Dimensions: 66.5 x 66.5 x 48 mm
Package Contents:
Heavy-duty Clamp Bracket x 1Flexible Adhesive Base (with 3M adhesive) x 2Anti-slip Rings x 8Hex Wrench x 11/4" to 2-Claw Adapter x 21/4" Camera Mount Adapter x 1Thumb Screws x 3Clamp Installation Wrench x 1
Compatible Models:Ace ProAceONE X2X3GO 3 (When using GO 3, it must be used with the GO 3 Magnetic Quick Release Bracket as an adapter).ONE RS
*Some illustrations are for functional and usage scenario explanations. Please refer to the actual product.
