》Instructions
Hand Strap Installation
Insta360 Accessory - Hand Wrist Strap | Xianchuang International
1. Align the strap as shown in the diagram and thread it through the cord hole on the bracket.
Insta360 Accessory - Hand Wrist Strap | Xianchuang International
2. Wear the bracket on your hand, first attach the large Velcro head, then stick the other two Velcro strips.
3. Mount the camera. Hold the screw, rotate the dial on the bracket to adjust the camera direction. Before use, you can test the installation according to the installation steps. If the strap is too long, you can trim a section of Velcro.
Wrist Strap Installation
Insta360 Accessory - Hand Wrist Strap | Xianchuang International
1. Align the wristband as shown and thread it through the cord hole on the bracket.
Insta360 Accessory - Hand Wrist Strap | Xianchuang International
2. Wear the bracket on your hand, first attach the large Velcro head, then stick the other two Velcro strips.
3. Mount the camera. Hold the screw, rotate the dial on the bracket to adjust the camera direction.
*Notes
1. Do not DIY with other accessories.
2. When using underwater, the camera needs to be equipped with underwater accessories.
3. The maximum weight the accessory can support is 250 grams.
*Maintenance
1. After use, air dry the hand and wrist straps for storage.
2. Do not use high temperature drying or blowing to prevent Velcro from failing and straps from deforming.
3. Store in a dry, cool, and ventilated place, and avoid prolonged exposure to sunlight.
》Package List
Insta360 Accessory - Hand Wrist Strap | Xianchuang International
》Compatible Models
Insta360 Ace Pro
Insta360 Ace
Insta360 X3
Insta360 ONE X2
Insta360 ONE R/RS (excluding One RS 1-inch panorama version)